Tulsa Inspection Resources

Overview


Tulsa Inspection Resources, LLC (TIR) is a full spectrum provider of Pipeline Inspection, Pipeline Integrity services and Non-Destructive Examination (NDE) services to the oil and gas industry. Our mission is to provide quality services, in a safe, professional, ethical, and cost-effective manner that can be tailored to add value for our clients throughout the life of their assets.

At TIR, we provide our clients with a full range of qualified inspectors, specifically selected to meet our customers criteria for all construction phases of a project. TIR personnel are highly qualified professionals who are very conscientious about their responsibility to represent TIR and the best interests of our clients.

  • Employment of personnel according to client preference.
  • Resumes of TIR personnel are available for client review upon request.
  • Individuals are thoroughly screened to assure their competence prior to any assignment being made.
  • TIR offers continuing education through Operator Qualification (OQ) testing and renewal processes.
Classifications of Inspectors

Tulsa Inspection Resources provides experienced professionals for all classifications of construction inspection, including but not limited to:

Construction Coordinator
Chief Inspector
Assistant Chief Inspector
Certified Welding Inspector
Certified API 653 Tank Inspector
Safety Inspector

NDT Auditor – Level II Film Interpretation
E & I Inspector
NACE Coating Inspector
Utility Inspector
Non-Certified Welding Inspector
Non-Certified Tank Inspector

Office Manager
Material Expeditor
Vendor Inspector
Tie-In Inspector
Directional Drill Inspector
Safety Inspector

Pipelines, Plants, and Related Facilities

Tulsa Inspection Resources has experience in numerous projects including:

  • Pipelines, new construction and rehabilitation.
  • Process plants
  • Pump and compressor stations (grassroots and upgrades)
  • Pig tracking and pigging facilities
  • Terminals
  • Tanks
  • Inline pipeline inspection and remediation programs
  • Inspection oversight of maintenance activities related to inline inspection and preparation for inspection
  • Maintain organization structure for quality control areas which insures regulatory compliance (DOT 195, DOT 192, ASME B31.4, and API STD 1104, etc.)
  • Detailed project cost tracking.

As a leading provider of pipeline integrity field support services, TIR offers services from initial AGM site survey and make-ready maintenance through to anomaly remediation and DOT final reporting.

Whether you are looking for a full-service provider or individual services to compliment your integrity management team, TIR has the ability and experience to complete surveys on pipelines in any location or condition.

  • AGM-GPS Survey
  • Pig Tracking (Cleaning, Gauge, ILI, etc.)
  • Turnkey ILI Inspection Support
  • Anomaly Dig Staking & As-Builts
  • Depth of Cover (DOC) & GPS Centerline Surveys
  • Complete Project Management
  • Pipeline Marker Placement and Installation
Dig Staking and As-Builts

TIR can generate customized dig sheets for all dig locations and provide accurate and efficient dig site staking. Locations are staked by means of top of ground chaining and/or sub-meter GPS utilizing ILI-XYZ coordinates. During excavation, TIR surveyors can be available to assist in verifying the location of each anomaly as well as providing digital documentation (As-Built) of anomaly repairs.

Doc & GPS Centerline Surveys

During depth of cover (DOC) & centerline surveys, GPS data is collected every 75 feet and at every feature (mile posts, pipeline markers, ROW issues, spans, exposures, etc.) Depth of cover will be collected every 100 feet or less, if required, and at each side of water bodies, low grade areas, poor ROW, and roadways/ditches.

Pipeline Marker Replacement and Installation

TIR provides the installation of pipeline markers to meet government regulations of line of sight and can include GPS coordinates to help in mapping of pipeline systems. TIR can replace or repair damaged markers or, in the event of a pipeline changing operators, install new markers system wide.

Pig Tracking

TIR provides 24-hour pig tracking for all types of pigging projects (ILI, Hydro, Cleaning, Gauging, Batching, Purging, Stopple Replacement, etc.) Our pigging experts are well trained in locating stuck or lost pipeline tools containing 22hz transmitters. Our highly trained pigging experts are fully equipped with all the modern tracking technology such as geophones, transmitters and receivers, computers with navigation, and proprietary tracking software.

TIR uses state of the art GPS equipment for all surveys including:

  • R-10 (Sub-Centimeter)
  • Pro-XRT (Sub-Decimeter)
  • Geo XT & XH (Sub-Meter)

TIR utilizes a proprietary database system to hold all survey and tracking data. Data can be exported to meet customized client requirements in any format.

All reporting data is subject to an extensive QA/QC process.

TIR employs a team of experienced integrity technicians. Each technician maintains their expertise through ongoing classroom and field training.

Project and Data Management

Data Management is a key differentiator for TIR relative to its competitors. TIR provides full data management services, including detailed reports and pipeline analysis and storage of data for its clients.

  • Inline inspection consulting including pipeline inspection feasibility studies.
  • Pipeline preparation for inline inspection such as AGM documentation and survey, assessment of launch and trap facilities, cleanliness, and line suitability to pass an inspection tool.
  • Historical as-built, repair, and maintenance record search and analysis.
  • Project cost tracking.
  • Design of specialized inspection tool runs, including liquid batching in gas lines or tools propelled with nitrogen or air.
  • Third party auditing of pipeline survey data.

FAST™ (Flaw Analysis and Sizing Technique) is an innovative technology that has been developed to allow for reliable ultrasonic inspection in a variety of components, materials, and thicknesses. FAST™ is an innovative way to use a longitudinal wave to do both detection and sizing of flaws. The most outstanding feature of FAST™ is the significant reduction of false calls while maintaining very high levels of detection.

FAST™ has been successfully applied to:

  • PDI qualified pipeline integrity examinations
  • Through-wall sizing of planar flaws
  • Stress Corrosion Cracking sizing
  • Heat exchanger tube welds
  • Boiler tube welds
  • Single side access S/S examinations
  • Thin-wall crack detection
QUEST®

(Quality Ultrasonic Examination and Sizing Technology) is an enhanced or automated version of FAST™ and, when applied allows for less expensive and more reliable inspection of pipeline welds.

When QUEST™ UT is utilized, the entire weld volume is examined in one scan, and many flaw sizes and shapes can be obtained. With QUEST®, there is no limitation on thin-walled material and only one side of the weld is needed for scanning.

QUEST® can accurately depth size long seam OD cracking found after Magnetic Particle examination. Detection, characterization, through-wall sizing and length sizing are done during the detection scan with no changes necessary in setup parameters or equipment.

Phased Array (PAUT)

Phased array instruments produce accurate, detailed cross-sectional pictures of internal structures at fast inspection speeds. Phased array technology uses multiple ultrasonic elements and electronic time delays to create beams that can be focused electronically for fast inspection, full data storage, and multiple angle inspections. Phased array technology provides precise measurement with the most reliable results. Phased Array applications include manual and manual encoded weld scanning. Encoded scans offer extremely accurate sizing of weld flaws along with cross sectional and planar views of the entire encoded scan area.

  • Automated ID Corrosion Mapping
  • PAUT corrosion mapping systems
  • utilize 64 transducer elements, versus
  • conventional corrosion mapping
  • systems which typically have only one.
  • This provides the accuracy of PAUT
  • with an acquisition speed five times
  • faster than conventional systems.
OD Anomaly Assessment

The Creaform laser scanner and Pipecheck software combine to provide extremely accurate (up to 50 micron) and repeatable results with acquisition speeds up to 80 times faster than manual pit depth gauging.

Corrosion - the Pipecheck corrosion module offers very fast and reliable data processing that generates instant, on-site results. In comparison with traditional measurement methods, this software offers accuracy and repeatability that are beyond expectations.

Mechanical Damage - the Pipecheck mechanical damage module has been developed specifically for pipeline mechanical damage analysis. This module features numerous key functionalities that increase dent understanding and facilitate the decision-making process.

Corrosion in Mechanical Damage - Pipecheck software is the one and only solution on the market to offer sophisticated tools able to extract corrosion depth that is located within a mechanical damage. This confidence will result in lower maintenance cost and reduced risk of costly failure.

Three step processes to accurate and reliable data:

  • Scan
  • Analyze
  • Report
  • High resolution capture of all corroded areas
  • Fast surface acquisition to increase efficiency
  • Improved scanning performance for small features such as pitting
  • Feature detection using real pipe geometry
  • Automatically applied interaction rules
  • Estimated burst pressure calculation
  • Enhanced virtual pit gauge capabilities near welds and obstacles
  • Reports includes worst-case-profile and predicted failure path
  • Export to CSV available for further analysis
  • Mesh export available
  • Customizable pass/fail criteria
  • Snapshot tool for 3D reporting

The primary objective of our facility team is to deliver unparalleled support to the customer, maintaining the asset in a fit-for-service condition while extending its remaining life in the most reliable, safe, and cost-effective manner. Our customers receive a tailor-made inspection plan customized to fit their needs no matter what size of project.

Our inspection teams partner with our customers to reduce risk and optimize costs associated with inspection and maintenance while ensuring compliance with regulatory standards.

  • Audits, assessments and gap analysis of Mechanical programs
  • Development of Mechanical Inspection Programs
  • Development of Mechanical Inspection Procedures
  • Development of equipment inspection, testing and preventative maintenance plans
  • Defining the requirements, and supporting the evaluation of inspection data management systems (IDMS)
  • Supporting the implementation of IDMS
  • Providing inspection and testing services during plant operations

TIR Mechanical NDE Service Offerings

  • API 510, 570, and 653
  • CWI Inspection
  • Inspection Planning
  • Turnaround Inspection
  • On-stream Inspection
  • Vendor Surveillance
  • Field QAQC
  • P&ID Walk down
  • Sketching / Drawing
  • Gap Analysis
  • QAQC Data Review

Contact TIR- Mechanical NDE when you need any of the following:

  • API Certified Inspectors
  • Site Supervisor
  • CWI Inspectors
  • Certified ASNT NDE Technicians,
  • AutoCAD Operators
  • Project Managers
  • Engineers
  • Data Analysts

ILI Support Services Data

Historic Prices

Search Prices
Ex: 1/1/2000
Ex: 1/1/2000
The Start Date should not be greater than the End Date.
Date Price ($) High ($) Low ($) Volume
7/16/2018 7.35 7.48 7.25 4,324
7/13/2018 7.31 7.35 7.14 9,489
7/12/2018 7.05 7.46 7.05 9,755
7/11/2018 7.39 7.51 7.30 5,989
7/10/2018 7.47 7.63 7.40 18,321
7/9/2018 7.40 7.93 7.33 15,207
7/6/2018 7.45 7.45 7.17 11,107
7/5/2018 7.15 7.27 7.04 10,130
7/3/2018 7.21 7.35 7.04 3,508
7/2/2018 7.30 7.41 7.18 7,049
6/29/2018 7.25 7.26 7.00 6,226
6/28/2018 7.07 7.15 7.02 9,208
6/27/2018 7.06 7.50 7.01 28,657
6/26/2018 7.55 7.69 7.48 5,192
6/25/2018 7.41 7.77 7.11 37,968
6/22/2018 7.91 7.99 7.74 18,792
6/21/2018 7.96 7.99 7.43 15,013
6/20/2018 7.61 7.93 7.61 9,229
6/19/2018 7.85 8.12 7.76 20,268
6/18/2018 7.77 8.15 7.77 33,731